How to Refinish a Table, No Sanding!

Alright, I have had a few requests about our table after I did the fun cabinet, so here it is....How to refinish a table with NO sanding! This is the very first project I ever did and it has a special place in my heart. :) It kicked off several other projects and helped me realize that old pieces of furniture can be made new again. And not just new, but fabulous too!

I found this table at a garage sale for $30. Can you believe that?! It's solid maple and in great condition.  Its only flaw was a few scratches and that its color was faded and outdated. It was just what I had been looking for. So we hauled it home and then I contemplated all the things I could do...I decided to do distressed white with a grey/brown chalk board top. Pretty ambitious for a first timer! And I was about to learn a few lessons. Ha!

Lesson #1: Spray evenly and allow each coat to dry. I used a spray primer/paint in one. It was the Rustoleum Brand Universal paint and primer from Lowe's.(pictured below). It makes a big project like this SO much easier and faster! Like days faster. But you need to evenly coat and then let it dry or it drips and cakes. If this happens, you're "no sanding" project all of a sudden has sanding. Ha!

Lesson #2: Don't skimp and go for the cheaper spray paints! I did this on another project and spent twice as much because you  get what you pay for! Nightmares just thinking about it! lol. Trust me on this one!

Lesson #3: Don't panic if it doesn't go perfectly at first. I distressed mine for a shabby look and used a little square of sand paper to take off paint in areas. If I got too much off, I would lightly spray a little over again. There, all better!

Lesson #4: Top coat! Top coat!  Top coat! Cannot stress this enough for furniture that is going to take a beating. Dining room tables or coffee/end tables are going to get hit, kicked, spilled on, etc. Top coat! Make sure you use several coats and let them dry. Top coats harden to ensure your paint stays safe underneath!

Lesson #5: Not all top coats are the same! Most oil based top coats dry with a yellow tint. Not good for a white project! and they are super sticky!!! I started with one and in five seconds realized it was a problem and tried to take it off with a damp rag.  The good news was I got it off in time. The bad news was it coated my hands for 2 days, even after a long soak in acetone! Use a water based polycrylic like MinWax. Its not sticky and dries crystal clear.

I did this project back in July and it is now January.  I have had no problems with chipping, flaking, or anything like that. I did use chalk board paint on top so I am careful to use pot holders and place mats so that it doesn't bubble from the heat. It's the only part that is not top coated, but it has been quite sturdy. It has held up to my son who bangs on it, rolls cars on it, and wipes his food on it. Ha!

Original Pin:

www.younghouselove.com

So here's my how to:

Supplies:

1) Rust-Oleum Universal Paint and Primer all in one-White.($6 each at Lowe's)

2) A fine-grain sand paper block if distressing.($2)

3) Medium size angled paint brush($2)

4) Small paint roller.($3)

5) MinWax Polycrylic Clear Top Coat.($15)--This dries crystal clear!

6) Chalk board paint. --I used Martha Stewart brand from Michael's ($5.99)
7) Damp rag

Instructions:

1) Find that piece of furniture that inspires you! This is BEFORE.

2) With a damp rag, wipe down all the pieces to make sure they are clean and free of dirt, food, dust, etc.

3) In a well ventilated area(I suggest outdoors!), use your Rust-Oleum Universal paint and primer in one. Use as directed!! Spray at enough distance that the paint does not drip, but that it is coating evenly(12 inches or so). 

4) Let each coat dry completely. Repeat. Make sure all areas are covered, even those nooks and crannies! You can see it would have been cute just solid white too!

5) If distressing, use a sand paper block of fine grain in areas that you want to make shabby.

6) Wipe down again to get all the paint dust off and make clean for top coat.

7) Using a brush, apply top coat. Let each coat dry completely. Use at least 3 to 4 coats on furniture that will be used frequently.

8) If doing the chalk board top: Using a small roller brush, paint the top with the chalk board paint. Let each coat dry. Use several coats for best results. To condition, rub chalk all over the top and then wipe off with damp cloth. Its ready to go!

Ta da!  This table took me a total of 3 days. I did about 2 coats of the spray primer/paint, about 4 coats of the top coat, and about 3 coats of the chalk paint. Follow paint instructions for drying times!

Our table is used everyday and we love it. Especially my daughter who loves to draw. Its a fun item in our house!

Hope this helps alleviate your fears of a big project! Happy Pinning!

If you liked this, you may also like How to Refinish Laminate furniture, No Sanding!
Here:
http://pinterestandthepauper.blogspot.com/2012/11/how-to-refinish-laminate-furniture-no.html

How to Refinish Laminate Furniture. No sanding!

Over the summer I found this cabinet at Goodwill for $19 and saw its potential. It was an old 70's style TV stand (when TV's were square. Ha!), and thought with a fun make-over it could become best friends with my recently revamped dining table. I am one of those people who love a good "Before and After." I find it kind of addicting. There is something in the result that is so satisfying! Even more gratifying, no sanding! I have refinished several pieces of furniture, and anything that takes out a step(especially one of the hardest) is always a welcome treat!

With an additional $20 in paint and primer, I happily transformed the old retro cabinet into a fun colorful piece of furniture. I confess I am a chevron nut! Hence the design I chose for the backing. But it turned out to be quite a simple project. Because it was made of fiberboard and laminate coating, I did have a small fear it would drive me to swearing, muttering to myself, and eventual insanity. Ha! But to my pleasant surprise, Pinterest offered me a solution. I think its safe to say it was a success! My results below:

The original Pin(over 500 pins!) and my inspiration:

http://thepeartreecottage.blogspot.com/2011/07/painting-particle-board-laminate.html?m=1

Here's how I did it:

Step 1:

Remove all hardware, shelves, doors, and hinges.

Step 2:

Wipe down all the pieces you intend to paint so they are nice and clean. (I had to fill in the cable hole as well.)

Step 3:

Prime every area you intend to paint. This step doesn't have to be perfect or pretty. It just needs a good coating or two of the primer. I painted several coats on the backing as I intended part of the white to be seen in the design. Then let it all dry completely.

Step 4:

Paint! I only had to use 2 coats.

Step 5:

When it was completely dry, I taped my design onto the back using Blue Painters tape and a measuring tape. I spaced the stripes out 1 and 1/2 inches apart and used a leveler to make sure I was keeping them at the right angle. Was really easy! Then I used some left over paint from my dining table project and filled in the taped lines.

After a few hours I pulled the tape off and Ta Da! Chevron stripes and a completed project!

Products I used:

1) Zinsser brand 123 Primer for All Surfaces in White from Walmart.(This is water based with no odor and went on so smooth.)

2) Colorplace Interior Semi-Gloss paint in Pistachio Ice Cream from Walmart. This also rolled on smooth.

3) Minwax Brand Polycrylic clear top coat. I love this top coat because it is water-based and doesn't smell and when it dries is a great protection. It also dries crystal clear unlike some of the others that have a yellowish tint. I have used this on several projects and already had this on hand. It is sold at Lowes.

4) Ultra smooth mini roller

5) Blue Painter's Tape

6) Measuring tape

7) Leveler

Hope this helps someone out with their next project! I found this easy, and if I dare say it, enjoyable!

If you liked this, you may also like How to Refinish a Dining Table, No Sanding! Here:
http://pinterestandthepauper.blogspot.com/2013/01/how-to-refinish-table-no-sanding.html